Air vent valves
SAV10
The SAV10 sanitary air vent is a self-acting valve designed for air venting applications with liquids. The valve closes when filled with liquid product. As the level falls, the valve opens if pressure is also relieved. The valve does not open under operating pressure, thus being mostly used as a start-up bleeding valve. Typical applications include air venting in CIP lines, tanks, high points in pipelines, amongst others.
Material
Stainless steel
Sizes
1” x 3/4″ and 1″ x 1″
Connections
ASME BPE clamp ferrules
Max. Pressure
N/A
Max. Temperature
N/A
Regulating Range
N/A
Flow Rate
Up to 3982 NL/min
Vacuum breakers
VB16C
The VB16C vacuum breakers are simple and reliable devices that automatically relieve or “break” an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume, such as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc.
Material
Stainless steel
Sizes
1″ – DN 25
Connections
ASME BPE, DIN and ISO clamp ferrules
Max. Pressure
16 bar
Max. Temperature
180 ºC
Regulating Range
N/A
Flow Rate
N/A
Sight glasses
SWS
The SWS sanitary sight glasses are designed to monitor liquid flow in any direction. Sight glasses (or flow indicators) are usually employed to detect either the presence or absence of fluid flow, turbulence, colour, etc. They are especially recommended for high purity applications.
Material
Stainless steel
Sizes
1/2″ to 4″
Connections
ASME BPE clamp ferrules
Max. Pressure
20 bar
Max. Temperature
200 ºC
Regulating Range
N/A
Flow Rate
N/A
Check valves
SRT10
The SRT10 all stainless steel disc check valve has a compact design and is specially designed for use with clean steam, hot condensate and other process fluid applications. They are particularly recommended for high purity applications.
Material
Stainless steel
Sizes
1/2″ to 4″
Connections
ASME BPE clamp ferrules or tube weld (ETO) ends
Max. Pressure
10 bar
Max. Temperature
200 ºC
Regulating Range
N/A
Flow Rate
N/A
Ball valves
M3H | 6″
M3H three pieces body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical, food and beverage industries.
Material
Stainless steel (investment casting)
Sizes
6″
Connections
ASME BPE clamp ferrules, tube weld (ETO) ends or a combination of both
Max. Pressure
40 bar
Max. Temperature
220 ºC
Regulating Range
N/A
Flow Rate
N/A
M3H | 21/2″ to 4″ – DN 65 to DN 100
M3H three pieces body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical, food and beverage industries.
Material
Stainless steel (investment casting)
Sizes
21/2″ to 4″ – DN 65 to DN 100
Connections
N/A
Max. Pressure
40 bar
Max. Temperature
220 ºC
Regulating Range
N/A
Flow Rate
N/A
M3H | 1/2″ to 2″ – DN 10 to DN 50
M3H three pieces body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical, food and beverage industries.
Material
Stainless steel (investment casting)
Sizes
1/2″ to 2″ – DN 10 to DN 50
Connections
ASME BPE or DIN clamp ferrules, tube weld (ETO) ends or a combination of both
Max. Pressure
40 bar
Max. Temperature
220 ºC
Regulating Range
N/A
Flow Rate
N/A
M3HP | 6″
M3HP three piece body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical, food and beverage industries.
Material
Stainless steel (bar stock)
Sizes
6″
Connections
ASME BPE clamp ferrules, tube weld (ETO) ends or a combination of both
Max. Pressure
40 bar
Max. Temperature
220 ºC
Regulating Range
N/A
Flow Rate
N/A
M3HP | 21/2″ to 4″ – DN 65 to DN 100
M3HP three piece body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical, food and beverage industries.
Material
Stainless steel (bar stock)
Sizes
21/2″ to 4″ – DN 65 to DN 100
Connections
ASME BPE or DIN clamp ferrules, tube weld (ETO) ends or a combination of both
Max. Pressure
40 bar
Max. Temperature
220 ºC
Regulating Range
N/A
Flow Rate
N/A
M3HP | 1/2″ to 2″ – DN 10 to DN 50
M3HP three piece body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical, food and beverage industries.
Material
Stainless steel (bar stock)
Sizes
1/2″ to 2″ – DN 10 to DN 50
Connections
ASME BPE or DIN clamp ferrules, tube weld (ETO) ends or a combination of both
Max. Pressure
40 bar
Max. Temperature
220 ºC
Regulating Range
N/A
Flow Rate
N/A
Pressure gauges
SMAN-63
The SMAN-63 are reliable general purpose sanitary bourdon tube pressure gauges designed for pressure measurement of liquid and gaseous media. These units have a size diameter of 63 mm, range marked in bar and are fully manufactured in stainless steel.
Material
N/A
Sizes
3/4″
Connections
ASME BPE clamp ferrules
Others on request
Max. Pressure
N/A
Max. Temperature
120 ºC
Regulating Range
N/A
Flow Rate
N/A
AMBIENT TEMPERATURE: -10 ºC to 60 ºC
PRESSURE RANGES:
0 to 4 bar / 0 to 6 bar
0 to 10 bar / 0 to 16 bar
ACCURACY: ±2,5% FS