Rolyn Engineering

Valsteam ADCA Pipeline Ancillaries

CAD
The CAD compressed air automatic drain valve consists of a solid-state timer coupled to a solenoid valve. It is especially designed for automatic drainage of filters, separators, aftercoolers, dryers, receivers, drip legs and other compressed air system components where condensate and contaminants may collect. The drainage interval and discharge time can be adjusted according to the requirements.

Material

N/A

Sizes

3/8” and 1/2”

Connections

Threaded ISO 7 Rp

Max. Pressure

N/A

Max. Temperature

N/A

Regulating Range

N/A

Flow Rate 

N/A
FA45.3
The FA45.3 is a range of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

Material

Stainless steel

Sizes

11/2” to 2” – DN 40 to DN 50

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld ASME B16.11

Max. Pressure

32 bar

Max. Temperature

250 ºC

Regulating Range

N/A

Flow Rate 

N/A
FA45.1
The FA45.1 is a series of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

Material

Stainless steel

Sizes

1” – DN 25

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld (SW) ASME 16.11

Max. Pressure

32 bar

Max. Temperature

Up to 250 ºC

Regulating Range

N/A

Flow Rate 

N/A
FA41.1
The FA41.1 is a series of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

Material

Stainless steel

Sizes

1/2” to 1” – DN 15 to DN 25

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld (SW) ASME 16.11

Max. Pressure

32 bar

Max. Temperature

Up to 250 ºC

Regulating Range

N/A

Flow Rate 

N/A
FA16SS
The FA16SS series are fully automatic ball float traps, extremely compact in dimension and light in weight, specially designed for draining water from compressed air lines. Usual applications include aftercoolers, separators and compressed air mains.

Material

Stainless steel

Sizes

1/2” and 3/4”

Connections

Threaded ISO 7 Rp or NPT

Max. Pressure

14 bar

Max. Temperature

180 ºC

Regulating Range

N/A

Flow Rate 

N/A
FA35.3
The FA35.3 is a range of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

Material

Carbon steel

Sizes

11/2” to 2” – DN 40 to DN 50

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld ASME B16.11

Max. Pressure

32 bar

Max. Temperature

250 ºC

Regulating Range

N/A

Flow Rate 

N/A
FA35.1
The FA35.1 is a series of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

Material

Carbon steel

Sizes

1/2” to 1” – DN 15 to DN 25

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld (SW) ASME 16.11

Max. Pressure

32 bar

Max. Temperature

Up to 250 ºC

Regulating Range

N/A

Flow Rate 

N/A
FA31.1
The FA31.1 is a range of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

Material

Carbon steel

Sizes

1/2” to 1” – DN 15 to DN 25

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld (SW) ASME 16.11

Max. Pressure

32 bar

Max. Temperature

Up to 250 ºC

Regulating Range

N/A

Flow Rate 

N/A
FA25.3
The FA25.3 is a range of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

Material

SG iron

Sizes

11/2” to 2” – DN 40 to DN 50

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-2 PN 16 Flanged ASME B16.42 Class 150

Max. Pressure

14 bar

Max. Temperature

250 ºC

Regulating Range

N/A

Flow Rate 

N/A
FA25.1
The FA25.1 is a range of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

Material

SG iron

Sizes

1” – DN 25

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1/-2 PN 16 Flanged ASME B16.42/B16.5 Class 150

Max. Pressure

14 bar

Max. Temperature

Up to 250 ºC

Regulating Range

N/A

Flow Rate 

N/A
FA21.1
The FA21.1 is a range of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

Material

SG iron

Sizes

1/2” to 1” – DN 15 to DN 25

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1/-2 PN 16 Flanged ASME B16.42/B16.5 Class 150

Max. Pressure

14 bar

Max. Temperature

Up to 250 ºC

Regulating Range

N/A

Flow Rate 

N/A
AE49.2
The AE49.2 range of high capacity automatic vents are designed to remove air or gases from water and or other liquid systems, without requiring any external source of energy. They are capable of handling high loads during start-up while still being able to discharge smaller loads in continuous modulating operation with one single orifice.

Material

Stainless steel

Sizes

21/2” x 11/2” and 3” x 11/2” DN 65 x DN 40 and DN 80 x DN 40

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld (SW) ASME 16.11

Max. Pressure

32 bar

Max. Temperature

Up to 200 ºC

Regulating Range

N/A

Flow Rate 

N/A
AE47.2
The AE47.2 range of high capacity automatic vents are designed to remove air or gases from water and or other liquid systems, without requiring any external source of energy. They are capable of handling significant loads during start-up while still being able to discharge smaller loads in continuous modulating operation with one single orifice.

Material

Stainless steel

Sizes

11/2” x 1” and 2” x 1” DN 40 x DN 25 and DN 50 x DN 25

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld (SW) ASME 16.11

Max. Pressure

32 bar

Max. Temperature

Up to 200 ºC

Regulating Range

N/A

Flow Rate 

N/A
AE45.2
The AE45.2 range of automatic vents are designed to remove air or gases from water and or other liquid systems, without requiring any external source of energy. They are capable of handling significant loads during start-up while still being able to discharge smaller loads in continuous modulating operation with one single orifice.

Material

Stainless steel

Sizes

1” x 1/2” and 1” x 1” DN 25 x 15 and DN 25 x 25

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld (SW) ASME 16.11

Max. Pressure

32 bar

Max. Temperature

Up to 250 ºC

Regulating Range

N/A

Flow Rate 

N/A
AE41.2
The AE41.2 range of automatic vents are designed to remove air or gases from water and or other liquid systems, without requiring any external source of energy. They are capable of handling significant loads during start-up while still being able to discharge smaller loads in continuous modulating operation with one single orifice.

Material

Stainless steel

Sizes

1” x 1/2” – DN 25 x 15

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld (SW) ASME 16.11

Max. Pressure

32 bar

Max. Temperature

Up to 250 ºC

Regulating Range

N/A

Flow Rate 

N/A
AE50i
The AE50 range of automatic vents are designed to remove air or gases from water and other liquid systems, without requiring any external source of energy. They are capable of handling significant loads during start-up while still being able to discharge smaller loads in continuous modulating operation with one single orifice. These ball float type vents are manufactured in stainless steel, available with soft sealing, and can be used in combination with other air elimination and separation systems or directly applied at high points in the pipelines.

Material

Stainless steel

Sizes

1/2” x 1/2” to 1” x 1/2” DN 15 x 1/2” to DN 25 x 1/2”

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300

Max. Pressure

30 bar

Max. Temperature

Up to 250 ºC

Regulating Range

N/A

Flow Rate 

N/A
AE30SS
The AE30SS all stainless steel sealed body air eliminator remove air from hot and superheated water systems and is also suitable for all liquids compatible with the construction, providing that their specific weight is not less than 0,75 kg/L. This ball float type automatic air eliminator can be used in combination with other air elimination and separation systems or directly applied at high points in the piping.

Material

Stainless steel

Sizes

1/2” and 3/4”

Connections

Female threaded ISO 7 Rp or NPT

Max. Pressure

30 bar

Max. Temperature

300 ºC

Regulating Range

N/A

Flow Rate 

N/A
AE16SS
The AE16SS all stainless steel air eliminator removes air from HVAC systems and are also suitable for non corrosive and/or dangerous liquids compatible with the construction, providing that their specific weight is no less than 0,75 kg/dm³. This ball float type automatic air eliminator can be used in combination with other air elimination and separation systems or directly applied at high points in the piping.

Material

Stainless steel

Sizes

1/2” and 3/4”

Connections

Female threaded ISO 7 Rp or NPT

Max. Pressure

14 bar

Max. Temperature

Up to 150 ºC

Regulating Range

N/A

Flow Rate 

N/A
AE39.2
The AE39.2 range of high capacity automatic vents are designed to remove air or gases from water and or other liquid systems, without requiring any external source of energy. They are capable of handling high loads during start-up while still being able to discharge smaller loads in continuous modulating operation with one single orifice.

Material

Carbon steel

Sizes

21/2” x 11/2” and 3” x 11/2” DN 65 x DN 40 and DN 80 x DN 40

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld (SW) ASME 16.11

Max. Pressure

32 bar

Max. Temperature

Up to 200 ºC

Regulating Range

N/A

Flow Rate 

N/A
AE37.2
The AE37.2 range of high capacity automatic vents are designed to remove air or gases from water and or other liquid systems, without requiring any external source of energy. They are capable of handling significant loads during start-up while still being able to discharge smaller loads in continuous modulating operation with one single orifice.

Material

Carbon steel

Sizes

11/2” x 1” and 2” x 1” DN 40 x DN 25 and DN 50 x DN 25

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld (SW) ASME 16.11

Max. Pressure

32 bar

Max. Temperature

Up to 200 ºC

Regulating Range

N/A

Flow Rate 

N/A
AE35.2
The AE35.2 range of automatic vents are designed to remove air or gases from water and or other liquid systems, without requiring any external source of energy. They are capable of handling significant loads during start-up while still being able to discharge smaller loads in continuous modulating operation with one single orifice.

Material

Carbon steel

Sizes

1” x 1/2” and 1” x 1” DN 25 x 15 and DN 25 x 25

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld (SW) ASME 16.11

Max. Pressure

32 bar

Max. Temperature

Up to 250 ºC

Regulating Range

N/A

Flow Rate 

N/A
AE31.2
The AE31.2 is a series of automatic vents designed to remove air or gases from water and other liquid systems, without requiring any external source of energy. They are capable of handling significant loads during start-up while still being able to discharge smaller loads in continuous modulating operation with one single orifice.

Material

Carbon steel

Sizes

1” x 1/2” – DN 25 x 15

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300 Socket weld (SW) ASME 16.11

Max. Pressure

32 bar

Max. Temperature

Up to 250 ºC

Regulating Range

N/A

Flow Rate 

N/A
AE50S
The AE50 range of automatic vents are designed to remove air or gases from water and other liquid systems, without requiring any external source of energy. They are capable of handling significant loads during start-up while still being able to discharge smaller loads in continuous modulating operation with one single orifice.

Material

Carbon steel

Sizes

1/2” x 1/2” to 1” x 1/2” DN 15 x 1/2” to DN 25 x 1/2”

Connections

Female threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300

Max. Pressure

30 bar

Max. Temperature

Up to 250 ºC

Regulating Range

N/A

Flow Rate 

N/A
VB16
The VB16 vacuum breakers are simple and reliable devices that automatically relieve or “break” an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume, such as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc.

Material

Stainless steel

Sizes

1/2” to 1”

Connections

Male threaded ISO 228 G

Max. Pressure

N/A

Max. Temperature

N/A

Regulating Range

N/A

Flow Rate 

N/A
LIMITING CONDITIONS: 12 bar at 150 ºC 16 bar at 120 ºC
VB21 – VB21M
The VB21 vacuum breakers are simple and reliable devices that automatically relieve or “break” an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc.

Material

Stainless steel

Sizes

1/2” x 1/8”

Connections

VB21 – Female threaded ISO 7 Rp or NPT VB21M – Male threaded ISO 228 G

Max. Pressure

N/A

Max. Temperature

N/A

Regulating Range

N/A

Flow Rate 

N/A
LIMITING CONDITIONS 13 bar at 400 ºC 21 bar at 220 ºC
IS40T (ASME)
The IS40T cast steel T strainers are applicable to all types of steam, water, oil and air systems. Their purpose is to protect steam traps, regulating valves, pressure reducing valves, piping, etc. from dirt which are oftentimes the cause of damage and consequently energy loss of fluid systems.

Material

Carbon steel

Sizes

1” to 4”

Connections

Flanged ASME B16.5 Class 150 or 300

Max. Pressure

N/A

Max. Temperature

N/A

Regulating Range

N/A

Flow Rate 

N/A
IS40T (EN)
The IS40T cast steel T strainers are applicable to all types of steam, water, oil and air systems. Their purpose is to protect steam traps, regulating valves, pressure reducing valves, piping, etc. from dirt which are oftentimes the cause of damage and consequently energy loss of fluid systems.

Material

Stainless steel or carbon steel

Sizes

DN 15 to DN 100

Connections

Flanged EN 1092-1 PN 16, PN 25 or PN 40

Max. Pressure

N/A

Max. Temperature

N/A

Regulating Range

N/A

Flow Rate 

N/A
IS16F
The IS16F cast iron Y strainers are applicable to all types of steam, water, oil and air systems. Their purpose is to protect traps, regulating valves, piping, etc. from dirt and impurities, which are often the cause of damage and consequent energy loss of fluid systems.

Material

Cast iron

Sizes

DN 15 to DN 300

Connections

Flanged EN PN16

Max. Pressure

N/A

Max. Temperature

N/A

Regulating Range

N/A

Flow Rate 

N/A
IS116
The IS116 forged steel Y strainers are applicable to all types of steam, water, oil and air systems. Their purpose is to protect traps, regulating valves, piping, etc. from dirt which are often the cause of damage and consequent energy loss of fluid systems.

Material

N/A

Sizes

1/2” to 2” – DN 15 to DN 50

Connections

Threaded ISO 7 Rp or NPT Flanged EN or ASME Socket weld (SW) ASME 16.11

Max. Pressure

100 bar

Max. Temperature

440 ºC

Regulating Range

N/A

Flow Rate 

N/A
IS140
The IS140 is a series of Y strainers applicable in all types of steam, water, oil and air systems. Their purpose is to protect equipment, such as steam traps and regulating valves, from dirt and impurities which often cause damage and consequent downtime and energy loss.

Material

Cast steel and stainless steel

Sizes

1/2” to 2”

Connections

Threaded ISO 7 Rp or NPT

Max. Pressure

40 bar

Max. Temperature

400 ºC

Regulating Range

N/A

Flow Rate 

N/A
DW12G-SS
The DW12 is a series of double window sight glasses specially designed for installation downstream of steam traps, to monitor their performance such as checking for live steam leakage or blockage. Such devices can also be used for monitoring flow conditions in other applications, particularly in pipelines with liquid medium.

Material

Cast iron and stainless steel

Sizes

DN 15 to DN 150

Connections

Flanged EN PN16

Max. Pressure

16 bar

Max. Temperature

280 ºC

Regulating Range

N/A

Flow Rate 

N/A
SCKi
The SCKi sight checkers function as both sight glasses and check valves. Such devices are designed for installation downstream of steam traps, to monitor their performance, while also working as reliable check valves to prevent condensate backflow.

Material

Stainless steel

Sizes

1/2” to 1”

Connections

Threaded ISO 7 Rp or NPT

Max. Pressure

10 bar

Max. Temperature

150 ºC

Regulating Range

N/A

Flow Rate 

N/A
DW40SS
The DW40SS is a series of double window sight glasses specially designed for installation downstream of steam traps, to monitor their performance such as checking for live steam leakage or blockage. Such devices can also be used for monitoring flow conditions in other applications, particularly in pipelines with liquid medium.

Material

Stainless steel

Sizes

1/2” to 2” – DN 15 to DN 50

Connections

Threaded ISO 7 Rp or NPT Flanged EN PN40 Flanged ASME Class 150 or 300

Max. Pressure

40 bar

Max. Temperature

250 ºC

Regulating Range

N/A

Flow Rate 

N/A
DW40S
The DW40S is a series of double window sight glasses specially designed for installation downstream of steam traps, to monitor their performance such as checking for live steam leakage or blockage. Such devices can also be used for monitoring flow conditions in other applications, particularly in pipelines with liquid medium.

Material

Carbon steel

Sizes

1/2” to 2“ – DN 15 to DN 50

Connections

Threaded ISO 7 Rp or NPT Flanged EN or ASME

Max. Pressure

40 bar

Max. Temperature

280 ºC

Regulating Range

N/A

Flow Rate 

N/A
SW12
The SW12 is a series of single window sight glasses specially designed for installation downstream of steam traps, to monitor their performance such as checking for live steam leakage or blockage. Such devices can also be used for monitoring flow conditions in other applications, particularly in pipelines with liquid medium.

Material

Brass

Sizes

1/2” to 1”

Connections

Female threaded ISO 7 Rp

Max. Pressure

12 bar

Max. Temperature

150 ºC

Regulating Range

N/A

Flow Rate 

N/A
PRV30SS | DN 15 – 25

Material

Stainless steel

Sizes

1/2” to 1″ – DN 15 to DN 25

Connections

Threaded ISO 7 Rp or NPT Flanged EN 1092-1 PN 40 Flanged ASME B16.5 Class 150 or 300

Max. Pressure

50 bar

Max. Temperature

80 ºC

Regulating Range

0,2 to 15 bar

Flow Rate 

Up to 6,5 m3/h
RD40 | DN 125 – 200
The RD40 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate.

Material

Stainless steel

Sizes

5” to 8” – DN 125 to DN 200

Connections

Sandwiched between flanges as per EN or ASME

Max. Pressure

40 bar

Max. Temperature

300 ºC

Regulating Range

N/A

Flow Rate 

N/A
RD40 | DN15 – 100
The RD40 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate.

Material

Stainless steel

Sizes

1/2” to 4” – DN 15 to DN 100

Connections

Sandwiched between flanges as per EN or ASME

Max. Pressure

40 bar

Max. Temperature

300 ºC

Regulating Range

N/A

Flow Rate 

N/A
RT25
The RT25 all stainless steel disc check valves have a compact design and were specially designed for use with steam and hot condensate.

Material

Stainless steel

Sizes

1/4” to 2”

Connections

Threaded ISO 7 Rp or NPT

Max. Pressure

21 bar

Max. Temperature

220 ºC

Regulating Range

N/A

Flow Rate 

N/A
VF40
The VF40 series are streamlined flow valves with bellows, outside screw, no rising stem and maintenance-free. They are especially recommended for use with steam, gases, liquids, condensate, thermal oil and water systems.

Material

Carbon and stainless steel

Sizes

DN 15 to DN 150

Connections

Flanged EN PN40

Max. Pressure

40 bar

Max. Temperature

300 ºC

Regulating Range

N/A

Flow Rate 

N/A
VF20
The VF20 series are streamlined flow valves with bellows, outside screw, no rising stem and maintenance-free. They are specially recommended for use with steam, gases, liquids, condensate, thermal oil and water systems

Material

Cast iron

Sizes

DN 15 to DN 200

Connections

Flanged EN PN16

Max. Pressure

16 bar

Max. Temperature

300 ºC

Regulating Range

N/A

Flow Rate 

N/A
GV32B
The GV32B bronze in-line stop valves are designed for use with steam, water, oil or air applications.

Material

Bronze

Sizes

1/2” to 2”

Connections

Threaded ISO 7 Rp

Max. Pressure

N/A

Max. Temperature

N/A

Regulating Range

N/A

Flow Rate 

N/A
LIMITING CONDITIONS: 14 bar at 198 ºC 32 bar at 100 ºC RATING: PN32
SRH
The SRH Spring return handle consists of a spring box which, when assembled, switches the ball valve to a safe position (closed or open), as soon as the operator releases its handle.

Material

Stainless steel

Sizes

N/A

Connections

ISO standard drive and mountings

Max. Pressure

N/A

Max. Temperature

N/A

Regulating Range

N/A

Flow Rate 

N/A
MWS1 / MWi1
The MWS1 and MWi1 series wafer ball valves are compact isolating valves designed for on/off applications with steam, condensate and other gases and liquids compatible with the construction.

Material

Carbon and stainless steel

Sizes

DN 15 to DN 150

Connections

Flanged EN PN16

Max. Pressure

16 bar

Max. Temperature

220 ºC

Regulating Range

N/A

Flow Rate 

N/A
M3S1
The M3S1 three piece ball valves are full bore isolating valves designed for on/off applications with steam, condensate and other gases and liquids compatible with the construction.

Material

Zinc plated carbon steel

Sizes

1/2” to 2”

Connections

Female threaded ISO 7 Rp or NPT Socket weld (SW) ASME B16.16 Butt weld (BW) ASME B16.25

Max. Pressure

100 bar

Max. Temperature

220 ºC

Regulating Range

N/A

Flow Rate 

N/A
RATING: PN 100
M3i1
The M3i1 three piece ball valves are full bore isolating valves designed for on/off applications with steam, condensate and other gases and liquids compatible with the construction.

Material

Stainless steel

Sizes

3/8” to 2”

Connections

Female threaded ISO 7 Rp or NPT Socket weld (SW) ASME B16.11

Max. Pressure

100 bar

Max. Temperature

220 ºC

Regulating Range

N/A

Flow Rate 

N/A
RATING: PN 100
M3i5
The M3i5 three piece ball valves are reduced bore isolating valves designed for on/off applications with steam, condensate and other gases and liquids compatible with the construction.

Material

Stainless steel

Sizes

1/2” to 2”

Connections

Female threaded ISO 7 Rp or NPT Socket weld (SW) ASME B16.11

Max. Pressure

100 bar

Max. Temperature

220 ºC

Regulating Range

N/A

Flow Rate 

N/A
RATING: PN 100
TG90
The TG90 are general-purpose bimetal thermometers designed for temperature measurement in simple heating applications with liquid and gaseous media. The unit has a nominal size diameter of 90 mm, units marked in Celsius degrees, casing manufactured in stainless steel, and includes a brass thermowell.

Material

N/A

Sizes

1/2″

Connections

ISO 228

Max. Pressure

N/A

Max. Temperature

– 20 to 60 ºC

Regulating Range

N/A

Flow Rate 

N/A
SCALE RANGES: 0 to 120 ºC Others on request. ACCURACY: ±2% FS
GSV
The GSV series pressure gauge siphons have been designed to protect pressure gauges from the effect of rapid pressure surges and hot pressure fluids. Specifically designed to replace the traditional “pigtail” and other coil design siphons where it is necessary to eliminate gauge whip and vibration. They operate as cooling elements for liquids and gases in pressure measuring devices.

Material

Stainless steel

Sizes

G1/2” (male x female)

Connections

Threaded ISO 228-1

Max. Pressure

N/A

Max. Temperature

N/A

Regulating Range

N/A

Flow Rate 

N/A
LIMITING CONDITIONS: 63 bar at 400 ºC 100 bar at 120 ºC
GSC / GSU
The GS series pressure gauge siphons were designed to protect pressure gauges from the effects of sudden pressure surges and hot pressurized fluids. They operate as cooling elements for liquids and gases in pressure measuring devices. An isolation pressure gauge cock is recommended to be installed in combination with gauge siphons.

Material

Stainless steel

Sizes

G1/2” (male x female)

Connections

Threaded ISO 228-1

Max. Pressure

N/A

Max. Temperature

N/A

Regulating Range

N/A

Flow Rate 

N/A
LIMITING CONDITIONS: 40 bar at 300 ºC 110 bar at 110 ºC
MAN-40
The MAN-40 are reliable and cost-effective, general purpose bourdon tube pressure gauges designed for pressure measurement of liquid and gaseous media. They have a nominal size diameter of 40mm, units marked in bar, steel case and polycarbonate window screen.

Material

N/A

Sizes

N/A

Connections

ISO 228 G 1/2″

Max. Pressure

0 to 2,5 bar / 0 to 4 bar 0 to 6 bar / 0 to 10 bar 0 to 16 bar / 0 to 25 bar 0 to 40 bar

Max. Temperature

60 °C

Regulating Range

N/A

Flow Rate 

N/A
AMBIENT TEMPERATURE: -10 ºC to 60 ºC ACCURACY: ±1,6% FS
MAN-63
The MAN-63 are reliable general purpose bourdon tube pressure gauges designed for pressure measurement of liquid and gaseous media. These units have a size diameter of 63 mm, range marked in bar and are fully manufactured in stainless steel.

Material

N/A

Sizes

N/A

Connections

ISO 228 G 1/4″

Max. Pressure

-1 to 1,5 bar / 0 to 2,5 bar 0 to 4 bar / 0 to 6 bar 0 to 10 bar / 0 to 16 bar 0 to 25 bar / 0 to 40 bar

Max. Temperature

100 ºC

Regulating Range

N/A

Flow Rate 

N/A
AMBIENT TEMPERATURE: – 10 ºC to 60 ºC ACCURACY: ±1,6% FS
MAN-100
The MAN-100 are reliable and cost-effective, general purpose bourdon tube pressure gauges designed for pressure measurement of liquid and gaseous media. They have a nominal size diameter of 100mm, units marked in bar and their casing is fully manufactured from stainless steel.

Material

N/A

Sizes

N/A

Connections

ISO 228 G 1/2”

Max. Pressure

0 to 2,5 bar 0 to 4 bar / 0 to 6 bar 0 to 10 bar / 0 to 16 bar 0 to 25 bar / 0 to 40 bar

Max. Temperature

110 ºC

Regulating Range

N/A

Flow Rate 

N/A
AMBIENT TEMPERATURE: – 10 ºC to 60 ºC
LGC400
The LGC stainless steel level gauge valves are specially conceived to supervise the functioning and visualize the liquid level in pressure operated pumps, reservoirs and other equipment. These valves are designed to be used with tubular glass, which can be supplied with the units.

Material

Stainless steel

Sizes

1/2” x 14 mm

Connections

Male threaded ISO 7 R

Max. Pressure

12 bar

Max. Temperature

200 ºC

Regulating Range

N/A

Flow Rate 

N/A
GC400
The GC400 gauge valves were designed for mounting of instruments such as pressure gauges, transmitters and switches. Throttling of the valve protects the connected instrument against pressure spikes. Complete valve shut-off and pressure release through the integrated vent plug allow safe instrument removal for replacement or calibration procedures.

Material

Carbon steel

Sizes

N/A

Connections

ISO 228 G 1/2”

Max. Pressure

N/A

Max. Temperature

N/A

Regulating Range

N/A

Flow Rate 

N/A