One of the widest ranges of steam traps in the market with standard to custom solutions providing the highest efficiency on your steam system.
Thermodynamic
DT46
The thermodynamic DT46 disc steam traps are compact and lightweight-easy to install traps, excellent for high pressure systems, including steam tracing applications. The insulation cover ensures a consistent operation and makes it particularly suitable for those applications where the weather conditions, such as rain and wind, may affect the normal operation. These traps have only one moving part and offer a wide operating range, without adjustment.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN PN 40, PN 63 or PN 100
Flanged ASME Class 150, 300 or 600
Socket weld (SW) ASME B16.11
Max. Pressure
46 bar
Max. Temperature
400 ºC
Regulating Range
N/A
Flow Rate
Up to 800 kg/h
DT42/2
The thermodynamic DT42/2 disc steam traps are compact and lightweight-easy to install traps, excellent for high pressure systems, including steam tracing applications. These traps have only one moving part and offer a wide operating range, without adjustment.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25.
Connections
Female threaded ISO 7 Rp or NPT.
Flanged EN 1092-1 PN 40 or PN 63.
Flanged ASME B16.5 Class 150 or 300.
Socket weld (SW) ASME B16.11.
Butt weld (BW) ASME B16.25 on request.
Max. Pressure
42 bar
Max. Temperature
300 ºC
Regulating Range
N/A
Flow Rate
Up to 1040 kg/h
DT40/2
The thermodynamic DT40/2 disc steam traps are compact and lightweight-easy to install traps, excellent for high-pressure systems, including steam tracing applications. The insulation cover ensures consistent operation and makes it particularly suitable for those applications where the weather conditions may affect the normal operation.
Material
Stainless steel
Sizes
3/8” to 1” – DN 10 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME B16.11
Butt weld (BW) ASME B16.25 on request
Max. Pressure
40 bar
Max. Temperature
300 ºC
Regulating Range
N/A
Flow Rate
Up to 740 kg/h
Float and Thermostatic
FLT151
The FLT151 is a series of high capacity float and thermostatic steam traps with integral air vent, designed for modulating discharge of condensate to ensure maximum system heat transfer .Specially designed for applications where continuous drainage is essential and extremely high loads are involved, such as those found in sugar and alcohol refineries.
Material
Carbon steel
Sizes
4” and 6” – DN 100 and DN 150
Connections
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Max. Pressure
12 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 172900 kg/h
FLT80
The FLT80 is a series of high capacity float and thermostatic steam traps with integral air vent, designed for modulating discharge of condensate to ensure maximum system heat transfer. Specially designed for applications where continuous drainage is essential and high loads are involved.
Material
Carbon steel
Sizes
3” and 4” – DN 80 and DN 100
Connections
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Max. Pressure
12 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 100000 kg/h
FLT50-FLT65S
The FLT50 and FLT65 are a series of high capacity float and thermostatic steam traps with integral air vent, designed for modulating discharge of condensate to ensure maximum system heat transfer. Specially designed for applications where continuous drainage is essential and high loads are involved.
Material
Carbon steel
Sizes
FLT50S – 2” to 21/2” ; DN 50 to DN 65 FLT65S – 21/2” to 4” ; DN 65 to DN 100
Connections
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Max. Pressure
12 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 50000 kg/h
FLT314TW
The FLT314TW is a series of high capacity float and thermostatic steam traps with integral air vent, designed for modulating discharge of condensate to ensure maximum system heat transfer. Specially designed for applications where continuous drainage is essential and high loads are involved.
Material
Carbon steel
Sizes
3” – DN 80
Connections
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Max. Pressure
12 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 100000 kg/h
FLT312 / FLT314
The FLT312 and FLT314 are a series of high capacity float and thermostatic steam traps with integral air vent, designed for modulating discharge of condensate to ensure maximum system heat transfer. Specially designed for applications where continuous drainage is essential and high loads are involved.
Material
Carbon steel
Sizes
FLT312 – 2” ; DN 50 FLT314 – 21/2” ; DN 65
Connections
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Max. Pressure
12 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 50000 kg/h
FLT22
The FLT22 is a series of high capacity float and thermostatic steam traps with integral air vent, designed for modulating discharge of condensate to ensure maximum system heat transfer.Specially designed for applications where continuous drainage is essential and high loads are involved.
Material
Carbon steel or stainless steel
Sizes
11/2” to 2” – DN 40 to DN 50
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 25
Flanged ASME B16.5 Class 150 or 300
Max. Pressure
21 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 12050 kg/h
FLT49TW
The FLT49TW is a range of high capacity float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential and high flow capacities are involved.
Material
Stainless steel
Sizes
3” to 4” – DN 80 to DN 100
Connections
Flanged EN 1092-1 PN 16 or PN 40
Flanged ASME B16.5 Class 150 or 300
Max. Pressure
32 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 45000 kg/h
FLT49
The FLT49 is a range of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vhttps://rolynengineering.co.za/wp-admin/post-new.php?post_type=rolyn-product#essels and other applications where continuous discharge is essential and high flow capacities are involved.
Material
Stainless steel
Sizes
2” – DN 50
Connections
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Max. Pressure
32 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 22500 kg/h
FLT47
The FLT47 is a range of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential and high flow capacities are involved.
Material
Stainless steel
Sizes
11/2” to 2” – DN 40 to DN 50
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld ASME B16.11
Max. Pressure
32 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 7300 kg/h
FLT45
The FLT45 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential.
Material
Stainless steel
Sizes
1” – DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
32 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 2490 kg/h
FLT41
The FLT41 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential.
Material
Stainless steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
32 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 710 kg/h
FLT40
The FLT40 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential.
Material
Stainless steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
32 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 595 kg/h
FLT39TW
The FLT39TW is a range of high capacity float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential and high flow capacities are involved.
Material
Carbon steel
Sizes
3” to 4” – DN 80 to DN 100
Connections
Flanged EN 1092-1 PN 16 or PN 40
Flanged ASME B16.5 Class 150 or 300
Max. Pressure
32 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 45000 kg/h
FLT39
The FLT39 is a range of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential and high flow capacities are involved.
Material
Carbon steel
Sizes
2” – DN 50
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld ASME B16.11
Max. Pressure
32 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 22500 kg/h
FLT37
The FLT37 is a range of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and all applications where continuous discharge is essential and high flow capacities are involved.
Material
Carbon steel
Sizes
11/2” to 2” – DN 40 to DN 50
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld ASME B16.11
Max. Pressure
32 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 7300 kg/h
FLT35
The FLT35 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential.
Material
Carbon steel
Sizes
1” – DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
32 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 2490 kg/h
FLT31
The FLT31 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
32 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 710 kg/h
FLT30
The FLT30 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer.
Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
32 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 595 kg/h
FLT29TW
The FLT29TW is a range of high capacity float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential and high flow capacities are involved.
Material
SG Iron
Sizes
3” to 4” – DN 80 to DN 100
Connections
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Max. Pressure
14 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 45000 kg/h
FLT29
The FLT29 is a range of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential and high flow capacities are involved.
Material
SG iron
Sizes
2” – DN 50
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-2 PN 16
Flanged ASME B16.42 Class 150
Max. Pressure
14 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 22500 kg/h
FLT27
The FLT27 is a range of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential and high flow capacities are involved.
Material
SG iron
Sizes
11/2” to 2” – DN 40 to DN 50
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-2 PN 16
Flanged ASME B16.42 Class 150
Max. Pressure
14 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 7300 kg/h
FLT25
The FLT25 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential.
Material
SG iron
Sizes
1” – DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1/-2 PN 16
Flanged ASME B16.42 Class 150
Max. Pressure
14 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 2490 kg/h
FLT21
The FLT21 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential.
Material
SG iron
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1/-2 PN 16
Flanged ASME B16.42 Class 150
Max. Pressure
14 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 710 kg/h
FLT20
The FLT20 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential.
Material
SG iron
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1/-2 PN 16
Flanged ASME B16.42 Class 150
Max. Pressure
14 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 595 kg/h
FLT16
The FLT16 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential.
Material
SG iron
Sizes
1/2″ and 3/4″ – DN 15 and DN 20
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-2 PN 16
Max. Pressure
14 bar
Max. Temperature
198 ºC
Regulating Range
N/A
Flow Rate
Up to 495 kg/h
Inverted Bucket
IB36i
The IB36i is a series of robust and versatile inverted bucket steam traps manufactured in stainless steel. These steam traps operate intermittently, and are suitable for use with low to high pressure saturated or superheated steam. Typical applications include drip points, steam tracing lines, dryers, chemical and laundry equipment.
Material
Stainless steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME B16.11
Butt weld (BW) ASME B16.25 on request
Max. Pressure
N/A
Max. Temperature
400 ºC
Regulating Range
N/A
Flow Rate
Up to 610 kg/h
IB36S
The IB36S is a series of robust and versatile inverted bucket steam traps manufactured in carbon steel. These steam traps operate intermittently, and are suitable for use with low to high pressure saturated or superheated steam. Typical applications include drip points, steam tracing lines, dryers, chemical and laundry equipment.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME B16.11
Butt weld (BW) ASME B16.25 on request
Max. Pressure
N/A
Max. Temperature
400 ºC
Regulating Range
N/A
Flow Rate
Up to 610 kg/h
IB30SS
The IB30SS is a series of general purpose robust and versatile inverted bucket steam traps manufactured in stainless steel. These steam traps operate intermittently and are suitable for use with saturated or superheated steam. Typical applications include drip points, steam tracing lines, dryers, chemical and laundry equipment.
Material
Stainless steel
Sizes
1/2” to 1”
Connections
Female threaded ISO 7 Rp or NPT
Socket weld (SW) ASME 16.11
Max. Pressure
17 bar
Max. Temperature
400 ºC
Regulating Range
N/A
Flow Rate
Up to 530 kg/h
IB30S
The IB30 series inverted bucket steam traps are recommended for applications where the most important requirements are overall operating efficiency and long, trouble-free service life. They operate intermittently, either wide open or tightly closed and are, therefore, best suited for medium and high steam pressure applications.
Material
Carbon steel
Sizes
11/2” to 2” – DN 40 to DN 50
Connections
Threaded ISO 7 Rp or NPT
Flanged EN PN 25
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
17 bar
Max. Temperature
220 ºC
Regulating Range
N/A
Flow Rate
Up to 3700 kg/h
IB30S
The IB30S is a series of general purpose robust and versatile inverted bucket steam traps manufactured in carbon steel. These steam traps operate intermittently and are suitable for use with saturated or superheated steam. Typical applications include drip points, steam tracing lines, dryers, chemical and laundry equipment.
Material
Carbon steel
Sizes
1/2” to 1”
Connections
Female threaded ISO 7 Rp or NPT
Socket weld (SW) ASME 16.11
Max. Pressure
17 bar
Max. Temperature
300 ºC
Regulating Range
N/A
Flow Rate
Up to 530 kg/h
IBB12
The IBB12 is a series of general purpose robust and versatile inverted bucket steam traps manufactured in SG iron. These steam traps operate intermittently and are suitable for use with saturated or superheated steam. Typical applications include drip points, steam tracing lines, dryers, chemical and laundry equipment.
Material
SG iron
Sizes
3/4” to 1” – DN 20 to DN 25
Connections
Threaded ISO 7 Rp or NPT
Max. Pressure
14 bar
Max. Temperature
198 ºC
Regulating Range
N/A
Flow Rate
Up to 1670 kg/h
IB12
The IB12 is a series of general purpose robust and versatile inverted bucket steam traps manufactured in SG iron. These steam traps operate intermittently and are suitable for use with saturated or superheated steam. Typical applications include drip points, steam tracing lines, dryers, chemical and laundry equipment.
Material
SG iron
Sizes
1/2” to 3/4” – DN 15 to DN 20
Connections
Threaded ISO 7 Rp or NPT
Max. Pressure
14 bar
Max. Temperature
198 ºC
Regulating Range
N/A
Flow Rate
Up to 530 kg/h
Thermostatic
TH36
The TH36 series thermostatic steam traps and air vents are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment where high discharge capacities are required.
Material
Carbon steel
Sizes
11/2” to 2” – DN 40 to DN 50
Connections
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
Butt weld (BW) ASME 16.25
Max. Pressure
22 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 4770 kg/h
TH35-2-3
The TH35 series thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment.
Material
Carbon steel
Sizes
1” – DN 25
Connections
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
22 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 2385 kg/h
TSW22
The TSW22 all stainless steel thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. Their small size makes them ideal for use with a wide variety of this equipment.
Material
Stainless Steel Wafer Design
Sizes
DN 15 to DN 25
Connections
Sandwiched between flanges
as per EN 1092-1 PN 16 or PN 40
Max. Pressure
22 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 795 kg/h
TH21
The TH21 series thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment.
Material
Carbon steel
Sizes
1/2” – DN 15
Connections
Threaded ISO 7 Rp or NPT
Flanged EN PN 25
Flanged ASME Class 150
Socket weld (SW) ASME 16.11
Max. Pressure
21 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 775 kg/h
TH32i
The TH32i series thermostatic steam traps and air vents are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment.
Material
Stainless steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
22 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 795 kg/h
TH32Y
The TH32Y series thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
22 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 795 kg/h
TSS22
The TSS22 all stainless steel thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. Their small size makes them ideal for use with a wide variety of this equipment.
Material
Stainless steel
Sizes
1/4” to 1”
Connections
Threaded ISO 7 Rp or NPT
Max. Pressure
22 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 795 kg/h
TH13A
The TH13A series thermostatic steam traps and air eliminators are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. Their small size makes them ideal for use with a wide variety of this equipment and especially as air eliminator.
Material
Brass
Sizes
1/2”
Connections
Threaded ISO 7 Rp or NPT
Max. Pressure
13 bar
Max. Temperature
200 ºC
Regulating Range
N/A
Flow Rate
Up to 360 kg/h
Bimetallic
BM-HC
The BM–HC series of bimetallic steam traps and air vents are simple and robust traps, recommended for process applications where high loads are involved. Tailor made to meet application requirements and supplied with several bimetallic regulators in order to achieve the required discharge capacity for the application in hands.
Material
Carbon steel
Sizes
11/2” to 5” – DN 40 to DN 125
Connections
Flanged EN 1092-1 PN 63
Flanged ASME B16.5 Class 900
Others on request
Max. Pressure
63 ºC
Max. Temperature
300 ºC
Regulating Range
N/A
Flow Rate
N/A
BSS20
The BSS20 all stainless steel bimetallic steam traps and air vents are simple and robust traps, specially suited for instrument tracing, line tracing applications and where condensate sensible heat can be recovered. The use of condensate sensible heat reduces steam consumption. The BSS20 is especially suitably for air venting applications.
Material
Stainless steel
Sizes
1/2”
Connections
Threaded ISO 7 Rp or NPT
Max. Pressure
20 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 1120 kg/h
BM90
The BM90 is a series of robust and efficient bimetallic steam traps and air vents. These steam traps are recommended for steam process applications where sensible heat can be recovered, such as steam tracing lines, drip points, storage tank coils and steam air venting. Specially designed for draining high pressure superheated steam lines and processes.
Material
Carbon steel
Sizes
1/2″ to 1″ – DN 15 to DN 25
Connections
Threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 250
Flanged ASME B16.5 Class 1500
Socket weld ASME B16.11
Butt weld ASME B16.25
Max. Pressure
160 bar
Max. Temperature
525 ºC
Regulating Range
N/A
Flow Rate
Up to 4500 kg/h
BM89
The BM89 is a series of robust and efficient bimetallic steam traps and air vents. These steam traps are recommended for steam process applications where sensible heat can be recovered, such as steam tracing lines, drip points, storage tank coils and steam air venting. Specially designed for draining high pressure superheated steam lines and processes.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 160
Flanged ASME B16.5 Class 900
Socket weld ASME B16.11
Butt weld ASME B16.25
Max. Pressure
110 bar
Max. Temperature
525 ºC
Regulating Range
N/A
Flow Rate
Up to 6500 kg/h
BM88
The BM88 is a series of robust and efficient bimetallic steam traps and air vents. These steam traps are recommended for steam process applications where sensible heat can be recovered, such as steam tracing lines, drip points, storage tank coils and steam air venting. Specially designed for draining high pressure superheated steam lines and processes.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 100
Flanged ASME B16.5 Class 600
Socket weld ASME B16.11
Butt weld ASME B16.25
Max. Pressure
85 bar
Max. Temperature
500 ºC
Regulating Range
N/A
Flow Rate
Up to 5800 kg/h
BM87
The BM87 is a series of robust and efficient bimetallic steam traps and air vents. These steam traps are recommended for steam process applications where sensible heat can be recovered, such as steam tracing lines, drip points, storage tank coils and steam air venting.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40 or PN 63
Flanged ASME B16.5 Class 300 or 600
Socket weld (SW) ASME B16.11
Butt weld (BW) ASME B16.25
Max. Pressure
45 bar
Max. Temperature
425 ºC
Regulating Range
N/A
Flow Rate
Up to 4100 kg/h
BM32 | DN 40 – 50
The BM32 series bimetallic steam traps and air vents are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
Material
Carbon steel
Sizes
11/2” to 2” – DN 40 to DN 50
Connections
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
Butt weld (BW) ASME 16.25
Max. Pressure
32 bar
Max. Temperature
300 ºC
Regulating Range
N/A
Flow Rate
Up to 3500 kg/h
BM32 | DN 15 – 25
The BM32 series bimetallic steam traps and air vents are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
32 bar
Max. Temperature
300 ºC
Regulating Range
N/A
Flow Rate
Up to 2900 kg/h
BM24 | DN 40 – 50
The BM24 series bimetallic steam traps and air vents are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
Material
Carbon steel
Sizes
11/2” to 2” – DN 40 to DN 50
Connections
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
24 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 9000 kg/h
BM24 | DN 15 – 25
The BM24 series bimetallic steam traps and air vents are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
24 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 2680 kg/h
BM20R
The BM20R series bimetallic steam traps and air vents are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
17 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 1840 kg/h
BM20i
The BM20i is a series of robust and efficient bimetallic steam traps and air vents. These steam traps are recommended for steam process applications where sensible heat can be recovered, such as steam tracing lines, drip points, storage tank coils and steam air venting.
Material
Stainless steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
Butt weld (BW) ASME B16.25 on request
Max. Pressure
N/A
Max. Temperature
N/A
Regulating Range
N/A
Flow Rate
Up to 1850 kg/h
BM20
The BM20 series bimetallic steam traps and air vents are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
Material
Carbon steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150 or 300
Socket weld (SW) ASME 16.11
Max. Pressure
17 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 1850 kg/h
Universal Steam Traps and Connectors
UBS20
The UBS20 series bimetallic steam traps and air eliminators, completely in stainless steel, are maintenance-free and sealed traps. Simple and robust, they are recommended for drip service, steam tracing applications and where condensate sensible heat can be recovered. These traps fit the UCX universal connectors and CTS4U compact stations.
Material
Stainless steel
Sizes
According to the connector
Connections
N/A
Max. Pressure
17 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
Up to 1850 kg/h
UTS22
The UTS22 series thermostatic steam traps and air eliminators, completely in stainless steel, are maintenance-free and sealed traps. They are specifically designed to be used on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. These traps fit the UCX universal connectors and CTS4U compact stations.
Material
Stainless steel
Sizes
According to the connector
Connections
N/A
Max. Pressure
22 bar
Max. Temperature
250 ºC
Regulating Range
N/A
Flow Rate
795 kg/h
UFS32
The UFS32 series float and thermostatic (integral air vent) steam traps are maintenance-free and sealed. They are specifically designed to work with low and medium pressure steam and all types of heating and process equipment. Typical applications include unit heaters, heat exchangers, driers, jacketed vessels, and all the applications where continuous drainage is essential.
Material
Stainless steel
Sizes
According to the connector
Connections
N/A
Max. Pressure
32 bar
Max. Temperature
245 ºC
Regulating Range
N/A
Flow Rate
Up to 630 kg/h
UIB36
The UIB36 series inverted bucket steam traps, completely in stainless steel, are maintenance free and sealed. These steam traps operate intermittently, and are suitable for use with low to high pressure saturated or superheated steam. Typical applications include drip points, steam tracing lines, dryers, chemical and laundry equipment. These traps fit the UCX universal connectors and CTS4U compact stations.
Material
Stainless steel
Sizes
According to the connector
Connections
N/A
Max. Pressure
27 bar
Max. Temperature
400 ºC
Regulating Range
N/A
Flow Rate
Up to 470 kg/h
UDT46
The UDT46 series thermodynamic steam traps are excellent for high-pressure systems, including steam tracing applications. The insulation cover ensures consistent operation and makes them particularly suitable for applications where the weather conditions may affect the normal operation.
Material
Stainless steel
Sizes
According to the connector
Connections
N/A
Max. Pressure
32 bar
Max. Temperature
245 ºC
Regulating Range
N/A
Flow Rate
Up to 695 kg/h
CTS4U
The CTS4U is designed as a complete and compact steam trap station, to be used in steam systems where a simplified and economic maintenance program is desired. It has been designed to replace the traditional multi-component trap station systems. Typical installations are drip service on steam lines, tracing and small process equipment. Two-bolt flange connector permits trap replacement in minutes without disturbing the piping. The CTS4U trapping station fits all universal swivel connector steam traps.
Material
Stainless steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Threaded ISO 7 Rp or NPT
Flanged EN PN 40
Flanged ASME Class 150
Max. Pressure
17,5 bar
Max. Temperature
230 ºC @ 10 bar
Regulating Range
N/A
Flow Rate
N/A
UCX41
The UCX series pipeline connectors are used in steam systems where a simple and economic maintenance program is desired. Typical installations are drip service on steam lines, tracing applications and small process equipment. The two-bolt flange connector allows for fast trap replacement without disturbing the pipelines. The UCX connector fits the universal swivel connection steam traps.
Material
Stainless steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Threaded ISO 7 Rp
Max. Pressure
47,8 bar
Max. Temperature
400 ºC
Regulating Range
N/A
Flow Rate
N/A
Universal Steam Traps and Connectors (Four-Bolt)
UBS90
The UBS90 series bimetallic steam traps and air eliminators, completely in stainless steel, are maintenance free and sealed traps. Simple and robust, they are recommended for drip service, steam tracing applications and where condensate sensible heat can be recovered. These traps fit the UCX90 four bolt universal connectors.
Material
Stainless steel
Sizes
According to the selected pipeline connector
Connections
Max. Pressure
N/A
Max. Temperature
N/A
Regulating Range
N/A
Flow Rate
Up to 5400 kg/h
UCX90
The UCX series pipeline connectors are used in steam systems where a simple and economic maintenance program is desired.
Typical installations are drip service on steam lines, tracing applications and small process equipment. The four-bolt flange connector allows for fast trap replacement without disturbing the pipelines. The UCX connector fits the universal four-bolt swivel connection steam traps.
Material
Stainless steel
Sizes
1/2” to 1” – DN 15 to DN 25
Connections
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 100
Flanged ASME B16.5 Class 600
Socket weld (SW) ASME B16.11
Max. Pressure
N/A
Max. Temperature
N/A
Regulating Range
N/A
Flow Rate
N/A
Complementary Equipment
MAS
The MAS series steam distribution manifolds are essentially designed to allow the placement of steam supply valves in a single location, reducing costs and providing easy control of different steam lines. The drain connection, with an automatic steam trap installed, discharges any condensate formed, thus providing high-quality dry steam.
Material
N/A
Sizes
DN 100 to DN 300
Connections
Flanged EN PN 16 or PN 40
Flanged ASME Class 150 or 300
Threaded ISO 7 Rp or NPT on request
Max. Pressure
N/A
Max. Temperature
N/A
Regulating Range
N/A
Flow Rate
N/A
UTT-100
The UTT – Ultrasonic Trap Tester is a battery-powered instrument that gives a visible and audible indication of ultrasonic frequencies. It provides easy, accurate leak detection and mechanical inspection through advanced ultrasonic technology. Before you begin testing, it is advisable to familiarize yourself with the basic components of your kit.
Material
N/A
Sizes
N/A
Connections
N.A
Max. Pressure
N/A
Max. Temperature
N/A
Regulating Range
N/A
Flow Rate
N/A
AFZ
The BDV, AFZ and HVV vent valves are designed to drain (blowdown) or vent (depressurize) pipework, steam traps, valves and others.
AFZ – Anti-freeze device – Automatic discharge of condensate from steam traps, valves, pipelines and others, to prevent the condensate from freezing.
Material
N/A
Sizes
3/8” and M22.
Connections
NPT-M.
ISO 228.
Metric fine pitch.
Max. Pressure
42 bar
Max. Temperature